Flash HPE Integrated Lights-Out 5 iLO5 Version 2.78 Dec 24, 2022
Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.
Please note iLO 5 v2.78 is positioned to be the bridge version for future iLO versions considering that future iLO 5 binary files will be 34 MB in size.
Previous versions of iLO 5 (before 2.78) had provision to only accept iLO 5 binary which was 32 MB in size.
This restriction has been removed in iLO 5 v2.78. The increase in the bin file size will be to support dual payload firmware for ensuring that customers
can use single iLO firmware package on any of the iLO ASICs (T265 or T285).
Important:
IPv6 network communications - Dedicated network connection only
Supported Networking Features
IPv6 Static Address Assignment
IPv6 SLAAC Address Assignment
IPv6 Static Route Assignment
IPv6 Static Default Gateway Entry
DHCPv6 Stateful Address Assignment
DHCPv6 Stateless DNS, Domain Name, and NTP Configuration
Integrated Remote Console
OA Single Sign-On
HP-SIM Single Sign-On
Web Server
SSH Server
SNTP Client
DDNS Client
RIBCL over IPv6
SNMP
AlertMail
Remote Syslog
WinDBG Support
HPONCFG/HPLOMIG over an IPv6 connection
Scriptable Virtual Media
CLI/RIBCL Key Import over IPv6
Authentication using LDAP and Kerberos over IPv6
iLO Federation
Networking Features not supported by IPv6 in this release
IPv6 Over Shared Network Port Connections
IPMI
NETBIOS-WINS
Enterprise Secure Key Manager (ESKM) Support
Embedded Remote Support (ERS)
Notes:
iLO 5 User Guide and Lights-Out Scripting Guide can also be found by following the links at:
http://www.hpe.com/info/ilo-docs
Select your lights-out product, then support & documents, then manuals.
Check the online help for additional information about how to use features.
Online help can be accessed from within the browser web pages by clicking the question mark in the upper right-hand corner of each page.
Add support for Intel ATS-M 75W, 100W and 150W Add support for NVIDIA H100 Redfish firmware inventory displays CEC FW version (40 GB NVIDIA GPU Drawer) Support for import of a trusted SSL certificate and its corresponding private key. Inclusion of ;Context; property in Redfish event which will display the value set by user during Redfish event subscription creation. Upgrade Requirement: Please note iLO 5 v2.78 is positioned to be the bridge version for future iLO versions considering that future iLO 5 binary files will be 34 MB in size. Previous versions of iLO 5 (before 2.78) had provision to only accept iLO 5 binary which was 32 MB in size. This restriction has been removed in iLO 5 v2.78. The increase in the bin file size will be to support dual payload firmware for ensuring that customers can use single iLO firmware package on any of the iLO ASICs (T265 or T285). NVMe drive reporting invalid drive IML and illuminating the Amber LED In a configuration with more than 10 logical network controller on bringing the logical controller up or down data doesnt get updated and AMS banner ; iLO did not detect Agentless Management…” shows up in iLO GUI. Thermal over temperature alerts observed with respect to Pensando DSP DSC-25 Cards UEFI iLO config utility lets users add special characters to the ILO hostname iLO IP addresses were not included in the SSL certificate SAN even when the user selects this option in the UI iLO is not holding onto Redfish Subscriptions due to invalid Sender-Address in Redfish Event Header For URI /redfish/v1/Managers/@ManagersId/SecurityService/, PATCH on the property TLSVersion using “Enabled” or ”Disabled” fails. On Gen 10 plus AMD systems, with more than 16 PCIe capable SK Hynix drives configured; the behaviour of a single option card (Drives/Storage Controllers/Network Adapters) in the configuration could be unknown or unpredictable.Version: 2.78 (24 Dec 2022)
Enhancements
Fixes
Recommended - HPE recommends users update to this version at their earliest convenience.
