月亮雨小组的天地 YLY Studio

hpe gen9 服务器ilo4升级中断电,报错270的解决方法

hpe gen9 服务器ilo4升级中断电,报错270的解决方法

先尝试重置ilo 的按钮长按10 秒,断电10秒后 连接


如果还不行,通过服务器内置的ilo 恢复模式 ftp 上传 ilo固件。

Most firmware upgrades finish successfully. In the unlikely event of server power loss during an iLO firmware upgrade, iLO might be recoverable when power is restored.


When the computer is booting, the kernel performs image validation on the main image. If the image is corrupted or incomplete, the kernel enters Failed Flash Recovery. Failed Flash Recovery activates an FTP server within iLO. The FTP server enables you to send an image to iLO for programming. The FTP server does not provide any other services.

A network client can connect to the FTP server. The user name for the connection is test, and the password is flash. To send a firmware image to iLO, use the FTP client PUT command. After receiving the image, iLO validates the image. If the image is a complete, signed, and valid firmware image, the kernel begins programming the FLASH partition.

After the image is programmed into the FLASH partition, reset iLO by issuing the RESET command to the iLO FTP server.

Example:

F:\ilo>ftp 192.168.1.2
Connected to 192.168.1.2.
220 FTP Recovery server ready.
User (192.168.1.2:(none)): ftp
331 Password required.
Password:
231 Logged in.
ftp> put iLO.bin
200 Ok.
150 ready for file
226-Checking file
226-File acceptable
226-Flashing   3% complete
226-Flashing   4% complete
226-Flashing   6% complete
.
.
.
226-Flashing  97% complete
226-Flashing  99% complete
226-Flashing 100% complete
226-Flashing completed
226 Closing file
ftp: 8388608 bytes sent in 1.38Seconds 6100.81 Kbytes/sec.
ftp> quote reset
221 Goodbye (reset).
Connection closed by remote host.
ftp> quit


关键是用户名 我用的ftp  密码 flash 就可以


用test的 用户名 不行



折腾了 linux ,esxi 系统里面的升级固件程序都报错。


还是这个恢复模式好用

作者:mysy2001 分类:计算机硬件 浏览:1059 评论:0
留言列表
发表评论
来宾的头像